Hkoenig AC8 - Step 3: Attach Cutting Cylinder; Step 4: Setup for Operation; Step 5: Process Food; Step 6: Stop Operation

3.
 Align arrow on cutting
cylinder to the other one
on arm then assemble
prepared cutting cylinder
into arm
counter-clockwise shown
as picture.
4.
 Assemble loading tray
into cutting cylinder then
place bowl under the
outlet of cutting cylinder.
 Power on for running .
5.
 Turn switch to appropriate
speed then put food into
feeding inlet with pusher
to push down food.
6.
 Turn switch to “OFF”
when food is ready then
unplug and cut off power.
 Remove pusher and
loading tray.
7.
 Remove cutting cylinder
from arm clockwise.