the appliance completely inaperative.
Installation must be carried out
according to the manufacture's
instructions.
The supply cable must not be replaced by
the user, as this requires the use of special
tools, if the supply cable is damaged,
contact an authorized Service Centre.
Do not fill the appliance under a running
tap.
Do not allow the supply cable to corne into
contact with the ironing plate.
If the safety eut-out intervenes, the iron
will no longer function. To restore normal
operation. Contac a qualified electrician.
Never direct the steam jet in the direction
of persans, as this may be extremely
dangerous. Do not use the iron on very
wet fabrics.
Do not place the iron on the stand when
the plate is hot.
Do not overfill the boiler and do not add
stain-removers of simllar products to
water.
To Next Page
Loading...
