appliance again, remove the plug from
the socket and eut the supply cable to
render the appliance completely
inaperative.
Installation must be carried out
according to the manufacture's
instructions.
The supply cable must not be replaced by
the user, as this requires the use of
special tools, if the supply cable is
damaged, contact an authorized Service
Centre.
Do not fill the appliance under a running
tap.
Do not allow the supply cable to corne
into contact with the ironing plate.
If the safety eut-out intervenes , the iron
will no longer function. To restore normal
operation. Contac a qualified electrician.
Never direct the steam jet in the direction
of persans, as this may be extremely
dangerous. Do not use the iron on very
wet fabrics.
Do not place the iron on the stand when
the plate is hot.
To Next Page
Loading...
