Need help?Do you have a question about the HMC The Green Machine 2500 and is the answer not in the manual?
Instructions for mounting the engine and stand, ensuring secure attachment.
Steps for attaching the handle, adjusting its position, and setting the throttle lever.
Checking ignition plug, cooling passages, air cleaner, and compression before use.
Guidance on using the correct fuel mixture for the 2-cycle engine.
Procedure for starting the engine when it is cold, including choke and throttle settings.
Procedure for starting the engine when it is already warm.
How to adjust the idling speed for stable engine operation.
Procedure for safely shutting down the engine.
Routine checks and cleaning for daily operation.
Scheduled maintenance tasks to be performed every 30 hours of use.
Scheduled maintenance tasks for every 100 hours of operation.
Guidance on cord length, cutting direction, and general trimming practices.
Essential safety measures, including eye protection and bystander safety.
Adjusting handle and strap for optimal user comfort and control.
Techniques for edging, mowing, sweeping, and trimming trees effectively.
Information on string wear, 'RAC' cooling, and replacing the cutting line.
Reasons for using Green Line string and factors affecting its lifespan.
List of essential tools required for operating and maintaining the Green Machine.
Information regarding the 90-day limited warranty and service.
Formal statement of warranty terms, coverage, and limitations for the Green Machine.
To Next Page
General