Need help?Do you have a question about the HMS Networks Anybus Wireless Bolt II and is the answer not in the manual?
General| Brand | HMS Networks |
|---|---|
| Model | Anybus Wireless Bolt II |
| Category | Network Hardware |
| Language | English |
Provides an overview of the manual's purpose and scope.
Explains symbols, lists, and text formatting used in the document.
Lists trademarks and ownership for Anybus products.
Outlines essential safety precautions, including RF energy and ESD.
Defines the product's purpose as a communication interface and gateway.
Lists necessary cables for configuration and network connection.
Emphasizes the need for local network information before installation.
Advises on optimal placement for wireless signal reception and interference avoidance.
Details the supported operating systems for the product.
Guides to find additional documentation, FAQs, and technical support.
Introduces HMS IPconfig for discovering and accessing the Bolt II.
Specifies required third-party software, like Microsoft Excel for log files.
Shows the physical dimensions and mounting details of the Bolt II.
Provides instructions for physically mounting the Bolt II onto a surface.
Details how to connect the Bolt II using Power over Ethernet.
Explains how to connect both power and Ethernet cables to the Bolt II.
Guides on establishing a connection for initial product configuration.
Covers accessing the device's configuration interface via a web browser.
Explains IP settings needed to access the web interface.
Steps to log in to the device's web interface.
Instructions on how to log out of the web interface.
Describes the layout and functionality of the device's web interface.
Explains the different wireless operational modes available for the Bolt II.
Details the procedure for setting up the Bolt II in cable replacement mode.
Guides on configuring the Bolt II to function as a Wi-Fi access point.
Configuration of wireless parameters like SSID, security, and channel.
Configures wireless settings for Device A in cable replacement mode.
Configures wireless settings for Device B in cable replacement mode.
Configures wireless settings for the device in access point mode.
Settings for WLAN channels and regulatory world mode.
Configuration of the Ethernet interface settings, including IP.
Steps to manually configure the device's Ethernet IP settings.
How to enable the DHCP client for automatic IP assignment.
Describes how to save and apply the configured settings to the device.
Shows how to view device status and network overview on the home page.
Explains the meaning of the LED indicators on the Ethernet port.
Using Bolt II to replace physical Ethernet cables in a network.
Accessing PLC interface wirelessly from a handheld device.
Setting device time, date, and NTP synchronization.
Exporting and importing device configuration settings.
Restoring device settings to their default configuration.
Viewing, validating, and updating the device firmware.
Installing a web server certificate for secure connections.
Steps to change the login password for enhanced security.
Viewing event logs and monitoring the Bolt II's status remotely.
Detailed log of system events for troubleshooting.
Monitoring device status and LED indications remotely.
Locating the Bolt II's IP address using HMS IPconfig.
Rebooting the Bolt II using its physical reset button.
Rebooting the Bolt II through its web interface.
Resetting the Bolt II to factory defaults via the reset button.
Performing a factory reset via the device's web interface.
How to generate a support package for technical assistance.
Lists the detailed technical specifications of the Anybus Wireless Bolt II.
To Next Page
