Hobart 2812 User Manual

– 11 –
USING THE MEMORY KEY:
In Weight Mode . . .
You can enter the preset weight by using the numeric
keys (for example, 125). The lb indicator will blink
and the preset weight, 1.25 lb, displays.
[ If you make a mistake, press the Clear key,
,
and reenter the numeric value, or press the
key twice to restore the previous values.]
Press the Memory key,
, to store the value in
memory and display the actual platter weight (0.00).
If you press the Memory key,
, when there is weight on the platter, the platter weight will be saved
in memory. The actual platter weight displays until you remove the product from the platter and the
display returns to 0.00.
To briefly display the preset weight, press the Recall key, .
Set the Tare, if needed.
Set thickness. Slice product. When the platter weight reaches the preset weight, a beep sounds.
To count slices, change to SLICE mode . . .
Press the Mode key,
. Slice is displayed instead of the WEIGHT indicator, lb. Enter the number
of slices by using the numeric keys. Slice will blink until you press the Memory key, .
Set thickness. Slice product. When the number of slices counts down to zero, a beep sounds.
The display can shift between
WEIGHT and slice modes by pressing the Mode key, , at any time. [
The displayed weight will reflect the platter weight (less Tare, if NET was displayed).]
Repeat or exit. Exit by pressing the Memory key again.
88812
.
88880
.
P1
P2
P3
P4
lb
slice
oz
M
NET
> 0 <— —
P1
P2
P3
P4
lb
slice
oz
M
NET
> 0 <— —
P1
P2
P3
P4
lb
slice
oz
M
NET
> 0 <— —
88000
.
P1
P2
P3
P4
lb
slice
oz
M
NET
> 0 <— —
88125
.
P1
P2
P3
P4
lb
slice
oz
M
NET
> 0 <— —
88000
.

Hobart 2812 Specifications

General

Brand	Hobart
Model	2812
Category	Kitchen Appliances
Language	English