Need help?Do you have a question about the Hobby Porter HP-007 and is the answer not in the manual?
General| Brand | Hobby Porter |
|---|---|
| Model | HP-007 |
| Category | Remote Control |
| Language | English |
Guidelines for safe operation, listing prohibited actions and mandatory precautions.
Diagram showing how to connect the receiver to the electronic speed controller and servos.
Explanation of the receiver's LED status indicators for power and signal status.
Description of connectors used to connect the receiver to the model and servos.
Step-by-step guide for powering on the transmitter and receiver system.
Procedure for binding the transmitter and receiver to establish a wireless connection.
Essential checks to perform before operating the system to ensure proper function and safety.
Details the information displayed on the transmitter interface, including voltage and mode indicators.
Assigns a 3-character name to the stored model for easy identification.
Adjusts the neutral position of throttle and steering channels for fine-tuning.
Sets the maximum travel limit for each servo channel, adjustable from 0 to 120%.
Adjusts the curve linearity of rocker channel output, affecting sensitivity at different points.
Applies anti-blocking to throttle for optimal braking and cornering control.
Sets mixed control for climbing vehicles, enabling modes for front/rear wheel steering.
Moves servo arm to a preset position when the transmitter signal is lost for safety.
Measures LiPo battery voltage, supporting 2S or 3S batteries.
Function to record elapsed time, with start, pause, continue, and clear operations.
Maintains a set speed automatically without constant trigger input.
Provides illumination for looking at accessories in low light conditions.
Indicates throttle operation with bright blue LEDs, showing amplitude with trigger pull.
To Next Page