06-11
Small roof bonnet
To open the roof bonnet
• This roof bonnet can be opened to three
different settings in the opposite direction to
trafc. Press the locking knob on the side and
use the adjusting lever to move the roof bon-
net to the desired position; then click it into
place. The bonnet has a maximum opening
angle of 50°.
To close the roof bonnet
• Release the adjusting lever from its catch
position and close the roof bonnet. The bon-
net is automatically locked when it has been
completely closed.
Black-out pleating and insect
screens
The shades and insect screens are integrated in
the window frame. The black-out pleating can be
adjusted to any desired position.
To close the black-out pleating
• Using the handle strip, pull the black-out
pleating to the desired position and let go of
the handle strip. The shade remains in this
position.
To open the black-out pleating
• Use the handle strip to pull up or down lightly
on the black-out pleating. The shade rolls
upward automatically.
To shut the insect screen
• Pull the insect screen completely down with
the strap and let go. The screen remains in
this position.
To open the insect screen
• Pull the insect screen slightly down with the
strap and then guide it upward. The screen
rolls upward automatically.
Do not let the shade or the insect
screen y upward!
To Next Page
Loading...
Need help?
General
