05-4
Stable entry door
The upper
l
and lower
k
parts of the entry
door can be opened and closed separately by
opening the door and then unlocking the upper
part
l
of the door from the lower part.
Unlocking the upper part of the door
• Turn the lever
m
90° to the left and place it
in an upright position to separate the upper
and lower parts of the door.
• Open the upper part of the door complete-
ly and press it against the outer wall of the
vehicle. The door catch
n
will snap into its
counterpart
o
on the outer wall of the vehi-
cle and prevent the upper part of the door
from shutting inadvertently.
• The door frame and the lower part of the door
can now be swung back separately from the
upper part of the door and leaned against the
outer wall of the vehicle.
2
1
3
2
4
1
5 6
4
Internal entry door
To open
• Reach into the grip plate
j
, pull the release
lever, open the door and let go of the lever.
To close
• Pull the door shut.
• Press the locking button
k
.
In this manner, a door locked from
the outside can be opened from the
inside.
To Next Page
Loading...
Need help?
General
