10-8
For further detailed information on
operation, handling and maintaining
the hot-water heating system, please
refer to the separate operating in-
structions for “Alde Compact 3010”.
lights up and those functions that can be set will
start to blink. Use the arrows to select the func-
tion you wish to set. Settings are saved automa-
tically.
To start the hot water heater
Press the button with the arrow until the „Off“
sign (main switch) blinks on the display.
Press the +/On button. The „On“ sign (main
switch) will blink on the display.
The settings are now complete. The „On“ sign
(main switch) is shown on the display when the
control unit is in an idle state.
To shut off the hot water heater
Press the button with the arrow until the „On“
sign (main switch) blinks on the display.
To Next Page
Loading...
Need help?
General
