Hobby EXCELLENT 2018 - Page 64

60
7. Installation of electrical devices
• Ifthebatteryisnotusedforalongerperiodoftime(fourweeksor
more)pressthepushbutton(see page 95). The standby current
usedcontinuouslybysomeelectricaldevicesdischargesthebat-
tery.Evenifthemainswitchonthecontrolpanelhasbeenswit-
chedo,thebatterycanstillbechargedbythebatterycharger.
• Ifthebatteryhasbeenremoved,isolatethepositiveterminal(to
preventshortcircuits).
Battery charger
• Thechargecontrolleroperateswiththeuseofasensororusing
IU
1
U
0
chargingtechnologyprovidedthesensorhasnotbeen
calibratedortheCIBUSsystemisoine.PleaserefertoChap-
ter 7.3 Battery Management to calibrate the sensor.
• Inthecaseofmisusetheguaranteeandmanufacturer’sliability
willnolongerapply.
• Ensurethatthebatterychargerissucientlyventilated.
Tank probe
Theprobewithrodsmeasuresthecontentsofthefreshwatertank.
• Neverletthewaterstandtoolonginthetank,topreventscaling
(inthewastewaterandwastetanksaswell).
• Flushthetanksregularly.
230V automatic circuit breaker with an earth leakage circuit
breaker
The230Vautomaticcircuitbreakersuppliesandprotectsthe
230V devices.
• Toswitchothe230Vpowersupplyintheentiresystem,set
the230Vautomaticcircuitbreakerto“0”(OFF).
Fuses
• Onlyreplaceablownfuseafterthecauseoftheerrorhasbeen
xedbyanauthorisedspecialist.
• Thenewfusemusthavethesameamperageastheoldone.