Operating the Device 55
point 2 AutoCPAP and point 2 BILEVEL ST20/25:
1. Select the complete menu (see page 47).
2. Use the selection keys and to select Mode.
3. Press the the enter key and if necessary, input the PIN code with the selection
keys and . Press the enter key after every digit.
4. Use the selection keys and to select the CPAP mode.
5. Press the selection key . The menu item Press. is now displayed.
6. Press the enter key and then use the selection keys and to set the desi-
red value. Confirm your setting by pressing the enter key .
IPAP
(only point 2 BILEVEL ST20/25 in modes BILEVEL S, T and ST)
Selection of inspiration pressure (IPAP) by the physician
1. Select the complete menu (see page 47).
2. Use the selection keys and to select IPAP.
3. Press the the enter key and if necessary, input the PIN code with the selection
keys and . Press the enter key after every digit.
4. Press the enter key and then use the selection keys and to set the desi-
red value. Confirm your setting by pressing the enter key .
The parameter EPAP is set next.
To Next Page
Loading...
