This document provides the user manual for a HOGYME metal shed, model numbers HG61X0651, HG61S0647, and HG61M0643. It includes instructions for assembly, important technical specifications, usage features, and maintenance guidelines.
Function Description
The HOGYME metal shed is designed as a storage building for outdoor use. It provides a secure and weather-resistant space for storing various items, protecting them from the elements. The shed is not intended for living purposes.
Important Technical Specifications
Dimensions
The shed has the following approximate dimensions:
- Width: 83.9 inches (213.1 cm)
- Depth: 79.9 inches (202.9 cm)
- Height: 72.8 inches (184.9 cm)
- Door Height: 59.8 inches (151.9 cm)
- Door Width: 37.8 inches (96 cm)
- Side Wall Height: 46 inches (116.8 cm)
Installation Area Requirement
A minimum installation area of 83.9 inches (213.1 cm) by 50 inches (127 cm) is recommended to accommodate the shed and allow for assembly.
Material
The shed is constructed from steel plates, with a colored side intended to face outward. A strong plastic sheet (at least 150µm thick) is recommended to be placed under the foundation to reduce rising dampness and condensation.
Hardware Components
The manual details a comprehensive list of hardware components, categorized by their function (UNDER, MIDDLE, TOP1, TOP2, DOOR, ANNEX) and including their dimensions (MM), quantity (QTY), and box number. Key components include:
- Bs-A1 to Bs-A6: Base frame components, ranging from 916mm to 1166mm in length.
- Bm-A7, Bm-A7a, Bm-A7b, Bm-8, Bm-16, Bm-17: Middle section panels and supports, mostly 1550mm in length.
- Bs-A9, Bs-A10, Bs-A11, Bs-A12, As-A13: Middle and top section supports, ranging from 986mm to 1166mm.
- As-A19, As-A20, As-A22: Top section components, 1001mm to 1166mm.
- T-A29, T-A29a, Am-A23, Am-26, As-A38, As-A39, Am-A28: Top section and roof components, ranging from 140mm to 1280mm.
- Bm-A30, Bm-A31, Bm-A32, Bm-A35, Bs-A33, Bs-A34, Bs-A36, Bs-A37: Door components, ranging from 424mm to 1538mm.
- T-P1 to T-P7: Miscellaneous plastic parts and accessories, including a door sliding channel (T-P7, 150mm).
- S1, S2: Washers (S1: X92, S2: X178).
- F1, F2, F3: Screws (F1: st4X10 X247, F2: M4X10 X84, F3: st5X16 X8).
- V-A1, V-A2: Ventilation components (V-A1: 1018mm X4, V-A2: 751mm X4).
Usage Features
Assembly Process
The manual outlines a detailed, step-by-step assembly process, starting from the base frame and progressing through the middle sections, roof, and door. Each step is illustrated with diagrams and specifies the required parts and quantities.
- Teamwork: Two or more people are required for assembly to ensure safety and efficiency.
- Preparation: Before starting, users are instructed to check local building codes, ensure a square and level area with good drainage, and identify all parts from the Parts List.
- Foundation: The base is not included, and users may need to purchase or construct their own foundation and anchoring system. A plastic sheet is recommended under the foundation to prevent dampness.
- Anchoring: The shed must be anchored to prevent wind damage. Silicone application along the inside of the base rail is recommended to minimize condensation.
- Orientation: Specific instructions are provided for orienting panels, such as "Make the colored side of the steel plate outward" and "Put the side with fewer holes facing up."
- Rotation: Several steps involve rotating the partially assembled structure by 90°, 180°, or 270° to facilitate further assembly.
Door Mechanism
The shed features a sliding door mechanism. The manual suggests adding oil to the top and bottom door sliding channels to ensure smooth operation.
Ventilation
The inclusion of V-A1 and V-A2 components indicates that the shed incorporates ventilation features to help manage internal air circulation.
Maintenance Features
Cleaning
The shed should be cleaned with a soft cloth and water as needed.
Door Tracks
The door tracks must be kept clear of dirt and other obstructions to ensure the doors slide easily.
Snow Removal
Snow should be cleared from the shed with appropriate tools to ensure safe access.
Lubrication
Adding oil to the top and bottom door sliding channels is recommended for smooth door operation.
General Care
The shed is designed for storage and not for habitation.
Safety Precautions
- Weather Conditions: Assembly should be performed on a dry and calm day.
- Personal Protective Equipment: Safety gloves, eye protection, and long sleeves are recommended to prevent injury from sharp edges.
- Children and Pets: Children and pets should be kept away from the construction site.
- Roof Load: Users should never concentrate their total weight on the roof of the building.
- Ladders: When using a step ladder, ensure it is stable and safe.
Troubleshooting
- Missing Parts: If parts are missing, the seller should be notified within one week of receiving the product. Partial assembly with missing parts is discouraged due to potential wind damage.
- Floor Frame Alignment: The floor frame must be level and square for holes to align correctly. Diagonal measurements should be equal to confirm squareness.
- Customer Support: For missing parts, quality problems, or assembly questions, customers can email Hogyme.service@gmail.com for a reply within 24 hours.
Need help?
General
To Next Page
