Need help?Do you have a question about the Hohner UNIVERSAL 43/6 S and is the answer not in the manual?
General| Type | Mechanical |
|---|---|
| Model | UNIVERSAL 43/6 S |
| Number of Needles | 1 |
| Feed Type | Drop Feed |
| Buttonhole | 4-Step |
| Needle Positions | Left, Center, Right |
| Presser Foot | Snap-On |
| Stitch Types | Straight, zigzag |
| Included Feet | Buttonhole Foot, Zipper Foot |
Details the scope and content of the operating manual for the stitching head.
Specifies the required qualifications and responsibilities for operating the stitching head.
Explains the meaning of various symbols used for warnings and information in the manual.
Outlines the legal responsibilities of the manufacturer and user regarding the stitching head.
Defines the intended application of the stitching head and prohibits misuse.
Covers user's responsibility for safety equipment and regular device checks.
Emphasizes correct attachment and operational readiness of all safety features.
Stresses keeping the manual accessible and adhering to local safety regulations.
Mandates that only trained and authorized personnel may operate the equipment.
Identifies areas of the stitching head that pose a risk of injury due to moving parts.
Highlights the importance of timely servicing and safe procedures for resolving issues.
Prohibits any unauthorized changes or additions to the stitching head's design.
Provides guidelines for cleaning the machine and disposing of waste materials environmentally.
Provides a high-level introduction to the stitching head and references its diagrams.
Lists the relevant European guidelines and safety standards the stitching head meets.
Indicates the location of the stitching head's identification plate for reference.
Presents key specifications including net weight and required wire quality.
Details dimensions, wire specifications, and stitch spacing for normal stitching.
Details dimensions, wire specifications, and stitch spacing for loop stitching.
Contains detailed technical drawings and measurements of the stitching head.
Lists the standard accessories included with the stitching head upon delivery.
Guides on securely mounting and adjusting the stitching head onto the main machine.
Step-by-step instructions for threading the wire through the stitching head correctly.
Provides the procedure for safely detaching the stitching wire from the mechanism.
Details how to remove wire guide tubes, particularly during wire jamming incidents.
Explains how to align the wire for straight passage through the cutting mechanism.
Covers basic and fine adjustment procedures for controlling stitch length.
Provides instructions for adjusting the former to ensure precise stitching.
Details the installation and adjustment of parts used for saddle stitching.
Lists the specific parts required to convert the stitching head between stitch types.
Outlines the step-by-step process for converting stitch head functionality.
Notes on necessary adjustments after changing the stitching head's type.
Details lubrication intervals, recommended lubricants, and a lubrication schedule.
Provides general guidance for fitting new components and replacing existing ones.
Step-by-step instructions for removing and installing the former component.
Procedure for safely detaching and reinstalling the bender stop mechanism.
Instructions for removing and installing the main bender unit.
Guides on rotating, replacing, and adjusting the cutting knives for optimal performance.
Instructions on how to replace the driver component for normal stitching operations.
Instructions on how to replace the driver component for loop stitching operations.
Details the process for removing and installing the clincher part of the mechanism.
A troubleshooting guide listing common faults, their potential causes, and remedies.
To Next Page
