4-19
Chapter 4
DRIVING
Park brake operation
The park brake acts on the rear wheels
and the lever is located between the
front seats.
To apply the park brake, stop the vehicle,
apply the brake pedal and pull the lever
rmly upward.
To release the park brake:
1.
Push the button on the lever.
2. Pull the lever up slightly.
3. Lower the lever while holding the
button in.
WARNING
Do not drive the vehicle with the park
brake applied.
PARK BRAKE
CAPTIVA BOOK.indb 19 30/05/2007 12:49:34 PM
To Next Page
Loading...
