HOLDEN CG Captiva 2007 - Radio operation

1B-8
Chapter 1B
AUDIO
Balance control
Balance control adjusts the volume separation between left and right audio speakers.
1. Select the balance control mode using the
SOUND
button
:
.
The display screen
3
will show BAL right or left depending on the last setting used.
2. Rotate the
power/volume and mute rotary button
1
clockwise to bias the volume
to the right audio speakers.
The balance level display will change from RIGHT 01 to RIGHT 15.
3.
To bias the volume to the left speakers, rotate the
power/volume and mute rotary
button
1
anticlockwise.
The balance level display will change from LEFT 01 to LEFT 15.
When
the balance level display shows BAL 0, the volume level is centred between
the left and right audio speakers.
After a period of 5 seconds of inactivity, the display screen will return to the original
content.
EQ music style control
EQ is used to select between pre-dened sound equaliser settings.
1. Select the EQ control mode using the
SOUND
button
:
.
2. When the current EQ mode appears on the display screen, rotate the
power/
volume and mute rotary button
1
clockwise or anticlockwise to change the EQ
music style.
Each time the power/volume and mute
rotary button
1
is rotated, the EQ mode
will change shown:
Note The current EQ mode is shown on
the display screen.
After a period of 5 seconds of inactivity,
the display screen will return to the
original content.
Radio operation
1. Press the power/volume and mute rotary button
1
.
2. Press the
button
7
to select AM1, AM2 or AM-A.
3. Press the
button
7
to select FM1, FM2 or FM-A.
Manual tuning
1. Choose either AM or FM band using the or buttons
7
.
2. Use the
buttons
9
to increase or decrease the frequency one step at a time. The
frequency of the AM band changes in 9 KHz increments and the frequency of the
FM band changes in 0.1 MHz increments.
AUDIO SYSTEM cont.
EQ OFF > CLASSIC >
DANCE > ROCK > JAZZ >
POP > VOICE > TECHNO
C100_1B003
CAPTIVA BOOK.indb 8 30/05/2007 12:49:04 PM