EasyManua.ls Logo

HOLDEN CG CAPTIVA 5 2010 - Ignition Switch

HOLDEN CG CAPTIVA 5 2010
191 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-6
Chapter 2
LOCKS
WARNING
Do not switch the engine off while
the vehicle is moving as there
will not be any power assist for
brakes or steering.
Never remove the key while the
vehicle is moving, as this will lock
the steering.
LOCK
This is the normal parking position for the ignition switch; the accessories and engine
are off.
The ignition key can only be removed from the ignition switch when it is in this
position.
When the key is removed, the ignition and steering are locked. To release the steering
lock, insert the key into the switch and turn the key to any other position.
If you have trouble turning the ignition key to unlock the steering, turn the steering
wheel slightly to the right or left while turning the key.
ACC
When the ignition key is in this position, the engine is off, but accessories such as the
audio system can still operate.
To avoid attening the battery, avoid excessive use of accessories when the engine is
not running.
ON
In this position, the engine is ready to start (or is already started) and all electrical
systems are active.
Note
The warning lamps, which are designed to illuminate at the ignition ON position,
indicate the systems are working. Refer to Warning/reminder indications in
chapter 1A.
Do not leave the switch in the ON position for a prolonged period, unless the engine
is running, otherwise the vehicle’s battery will discharge.
START
This is the position for starting the engine.
Turn the ignition key to the START position until the engine starts. The key automatically
returns to the ON position when released.
IGNITION SWITCH
MY10_CG_Captiva 5_MaxX C105_book6 6 5/4/2010 2:23:29 PM

Related product manuals