Instruments and controls 55
Trip computer
Each time MODE is pressed, the trip
computer displays changes in the
following sequence:
1. Driving distance for
remaining fuel
2. Average speed
3. Driving time
4. Ambient temperature
Whenever the ignition is turned
on, the last selected mode will be
displayed.
Driving distance
for remaining fuel
• Estimates driving distance to an
empty fuel tank from the current
fuel level.
• Estimates are calculated when
the fuel tank contains four litres
or more of fuel.
• When the distance to empty is
less than 50 km, --- ashes.
The driving distance for remaining
fuel may differ depending on the:
• Driving conditions
• Driving pattern
• Vehicle speed
Average speed
• Shows the average speed of the
vehicle.
• To reset the average speed to
zero, press MODE for more than
1 second.
BOOK_MY12_BARINA_SPARK.indb 55 24/11/2011 1:10:51 PM
To Next Page
Loading...
