102 Infotainment system
Pairing a Bluetooth
®
device
• When it is not possible to
connect to Bluetooth
®
, delete
the entire device list from
the Bluetooth
®
device to be
connected, and try again. If
deleting the entire device list
does not work, then reinstall the
device battery and reconnect.
• If there is a problem after the
Bluetooth
®
device is connected,
rotate MENU TUNE (14) to scroll
to Restore factory settings.
• For Bluetooth
®
devices that do
not support stereo headsets, the
Bluetooth
®
audio play function
cannot be used.
• It is not possible to listen to the
music through the Bluetooth
®
audio if an iPhone
®
is connected
through a USB connector.
1. Set up the Bluetooth
®
device to
be connected from its Bluetooth
®
setup menu, to enable other
devices to search for the
Bluetooth
®
device.
2. Press CONFIG (12).
3. Rotate MENU TUNE (14) to
scroll to Bluetooth settings.
Select Bluetooth.
Select Pair device.
4. Press MENU TUNE (14).
If there already is a Bluetooth
®
device connected to the
infotainment system:
Bluetooth is busy is displayed.
Connection standby is
displayed with a message and a
security code.
The initial value is 0000. This can
be changed:
1. Select Settings.
2. Select Bluetooth settings.
3. Select Bluetooth.
4. Change Bluetooth
®
code.
MY15_BARINA SPARK_BOOK.indb 102 14/07/2014 12:00:40 PM
To Next Page
Loading...
