Driving and operating 123
ON: When the key is in this position,
the engine is ready to start and all
electrical systems are active.
Warning lamps will illuminate.
See Warning lights, gauges and
indicators on page 48.
Do not leave the switch in the ON
position for a long time, unless the
engine is running, otherwise the
vehicle’s battery will discharge.
START: Turn the key to this position
and release when the engine is
running.
Starting the engine
1. Apply the park brake rmly.
2. Automatic transmission: Move
the shift lever to the park or
neutral position.
Manual transmission: Push the
clutch pedal to the oor and
move the shift lever to the
neutral position.
3. Start the engine.
The engine starts automatically.
The key automatically returns to
the ON position.
4. Manual transmission: Release
the clutch pedal slowly.
Notes
• Do not depress the accelerator
pedal while starting the engine.
• Do not subject the engine to
full throttle acceleration or high
speeds until it has reached
normal operating temperature.
Premature engine wear or
damage may result.
Parking
1. Apply the park brake.
2. Automatic transmission: Select
position P.
Manual transmission: If facing
uphill or on at ground, select
1st gear. If facing downhill, select
reverse gear.
On an uphill slope, turn the front
wheels away from the kerb.
On a downhill slope, turn the
front wheels towards the kerb.
3. Shut all windows.
4. Turn the ignition off and remove
the key.
5. Press e on the key to lock all
doors. See Keys and locks on
page 15.
MY15_BARINA SPARK_BOOK.indb 123 14/07/2014 12:00:44 PM
To Next Page
Loading...
