132 Driving and operating
Operation
ABS operation is noticeable by
pulsing of the brake pedal and the
noise of the regulation process.
The initial self-check may also be
audible.
Keep the brake pedal fully pressed
throughout the braking process,
without pumping it.
Caution
If there is a malfunction with the
ABS, the vehicle’s brake system
remains operational, but without
ABS assistance. Have a Holden
Dealer check the system as soon
as possible.
Park brake
Applying the park brake:
1. Pull the lever straight up, without
pressing the release button.
Releasing the park brake:
1. Pull the lever slightly upwards.
2. Push in the release button on
the top of the lever and lower the
lever all the way down.
Warning
Never drive the vehicle with the
park brake applied.
Ride control systems
Traction Control
System (TCS)
TCS improves driving stability when
necessary, regardless of the type
of road surface or tyre grip, by
preventing the driving wheels from
spinning.
As soon as the driving wheels start
to spin, engine output is reduced and
the wheels are braked individually.
This considerably improves the
driving stability of the vehicle on
slippery road surfaces.
TCS is activated as soon as the
ignition is turned on.
Warning
Do not let this special safety
feature tempt you into taking
risks when driving.
Adapt speed to the road
conditions.
MY15_BARINA SPARK_BOOK.indb 132 14/07/2014 12:00:45 PM
To Next Page
Loading...
