Vehicle care 153
Parking lamps
1. Detach the plug connector from
the bulb.
2. Remove the protective cover.
3. Remove the side lamp, bulb
holder from the reector.
4. Remove the bulb from the
socket.
5. Insert a new bulb.
6. Place the side lamp, bulb holder
into the reector.
7. Replace the headlamp protective
cover into position and close.
8. Attach the plug connector onto
the bulb.
9. Check lamp operation.
MY15_BARINA SPARK_BOOK.indb 153 14/07/2014 12:00:49 PM
To Next Page
Loading...
