154 Vehicle care
Front turn signal lamps
1. Rotate the bulb holder
anticlockwise to disengage.
2. Push the bulb into the socket
slightly and rotate anticlockwise
to remove.
3. Insert a new bulb.
4. Place the bulb into the socket
and rotate clockwise.
5. Replace the bulb holder and
rotate clockwise to engage.
6. Check lamp operation.
Tail lamps, turn signals,
stop lamps and reverse
lamps
1. Unscrew both screws.
2. Remove the tail lamp assembly.
Note
Make sure the cable duct
remains in position.
MY15_BARINA SPARK_BOOK.indb 154 14/07/2014 12:00:50 PM
To Next Page
Loading...
