HOLDEN MJ BARINA SPARK 2015 - Fuses and Fuse Extractor

Vehicle care 155
• Tail lamp/stop lamp (1)
• Turn signal lamp (2)
• Reverse lamp (3)
3. Rotate the bulb holder
anticlockwise.
4. Push the bulb into the socket
slightly and rotate anticlockwise
to remove.
5. Insert a new bulb.
6. Insert the bulb holder into the tail
lamp assembly and screw into
place.
7. Install the tail lamp assembly into
the body and tighten the screws.
8. Close the covers and engage.
9. Check lamp operation.
MY15_BARINA SPARK_BOOK.indb 155 14/07/2014 12:00:50 PM