Vehicle care 157
Electrical system
Fuses
Warning
Turn off the ignition (LOCK
position) and any electrical
equipment before changing
a fuse.
• Replace blown fuses promptly.
• A blown fuse can be recognised
by its melted wire.
• Do not replace the fuse until
the cause of the fault has been
remedied.
• Some functions are protected by
several fuses.
• The vehicle may not be equipped
with all of the fuses, relays and
features shown.
Fuse extractor
A fuse extractor can be located
in the fuse box in the engine
compartment.
Place the fuse extractor on the top or
side of the fuse to extract the fuse.
Replace the fuse cover securely
after use.
Warning
When replacing a fuse be sure
to use a fuse of the specied
amperage.
Never install a wire or similar
as it could damage electrical
components and cause a re.
Any improper alterations to the
electrical system may cause a
re hazard and engine damage.
To maintain your own safety and
that of the vehicle, have any work
involving the electrical system or
the replacement of high current
fuses or relays carried out by a
Holden Dealer.
Engine compartment
fuse box
1. To disengage the cover, lift
upwards and remove.
Note
• Not all fuse box descriptions may
apply to your vehicle.
• When inspecting the fuse box,
refer to the fuse box label inside
the cover.
MY15_BARINA SPARK_BOOK.indb 157 14/07/2014 12:00:51 PM
To Next Page
Loading...
