58 Instruments and controls
Caution
Reset the engine oil life only
when an oil change is performed.
• See Engine oil life system on
page 185.
Unit setting
1. Press SET/CLR for a few
seconds.
2. Press or to select one of
the settings:
1: (MPH, °C)
2: (MPH, °F)
3: (km/h, °C)
The selected unit ashes.
3. Press and hold SET/CLR to
conrm.
Vehicle messages
(Automatic transmission)
The messages are displayed on
the DIC or can be heard as a
warning chime.
Displayed messages appear as
code numbers along with the Service
Vehicle Soon light B or the Owner
Manual indicator M.
Depending on vehicle equipment
and vehicle personalisation, some of
the functions described below may
not be available.
Caution
If a vehicle message is displayed,
have the vehicle checked by a
workshop immediately.
No. Vehicle message
10 Brakes Overheated
75 Service AC System
81 Service Transmission
82 Change Engine Oil Soon
89 Service Vehicle Soon
95 Service Airbag
Trip computer
The vehicle has a trip computer.
Each time or is pressed, the
trip computer display changes in the
following sequence:
1. Average consumption
(automatic transmission)
2. Driving distance for
remaining fuel
3. Instantaneous fuel consumption
(automatic transmission)
4. Average speed
5. Driving time
MY15_BARINA SPARK_BOOK.indb 58 14/07/2014 12:00:33 PM
To Next Page
Loading...
