160 Driving and operating
Decreasing set speed
1. Rotate the wheel towards SET/-
and hold it.
The vehicle will decelerate.
2. Release the wheel at the desired
speed.
3. Rotate the wheel towards SET/-
and release it immediately.
The speed will decrease by
1-2 km/h.
To temporarily accelerate
When the cruise control is on:
1. Press the accelerator pedal.
Note
Increasing speed will not
interfere with cruise control
operation or change the set
speed.
To return to the set speed:
1. Take your foot off the accelerator
pedal.
Temporary deactivation
Do one of the following:
• Press
Ø
.
• Reduce vehicle speed below
approximately 40 km/h.
• Press the brake pedal or press
the clutch pedal.
m illuminates white.
Resume stored speed
When the cruise control has a
desired speed previously set:
1. Press RES/+.
The most recently set speed will
automatically resume.
Deactivation
1. Press m.
m extinguishes.
Object detection
systems
Park Assist (PA)
The PA system is able to detect and
indicate obstacles at the rear of the
vehicle when reversing.
The system consists of four sensors
on the rear bumper.
To Next Page
Loading...
