Vehicle care 193
Interior lamps
Courtesy lamps
1. To remove the lamp, carefully
prise the opposite side of the
lamp to the switch using a
at-blade screwdriver.
Note Be careful not to scratch
the lamp.
2. Remove the bulb and replace.
3. Reinstall the lamp assembly.
4. Check lamp operation.
Load compartment lamp
1. Using a at-blade screwdriver,
prise the lamp assembly
outwards.
2. Remove the bulb and replace.
3. Reinstall the lamp assembly
rmly into place.
4. Check lamp operation.
Electrical system
Fuses
Warning
Turn off the ignition (LOCK
position) and any electrical
equipment before changing
a fuse.
• Replace blown fuses promptly.
• A blown fuse can be recognised
by its melted wire.
• Do not replace the fuse until
the cause of the fault has been
remedied.
• Some functions are protected by
several fuses.
To Next Page
Loading...
