78 Instruments and controls
Vehicle messages
Messages are displayed on the
Driver Information Centre (DIC) in
the instrument cluster or audible as
a warning chime.
Not all messages are displayed on
all vehicles.
Messages displayed on the DIC
indicate the status of the vehicle or
some action that may be needed to
correct a condition.
The messages that do not
require immediate action can be
acknowledged and cleared by
pressing SET/CLR.
The messages that require
immediate action cannot be cleared
until that action is performed. All
messages should be taken seriously
and clearing the messages does not
correct the problem.
Type 1
On the Type 1 display, most vehicle
messages appear as code numbers.
Some of these codes may appear
along with the service vehicle soon
light and the owner’s manual symbol
in the DIC display.
No. Vehicle message
2 No remote detected, press
clutch to restart
4 A/C off due to high engine temp
5 Steering column is locked
7 Turn steering wheel, turn key
off, then on
9 Turn steering wheel, start
vehicle again
10 Brakes overheated
15 Check high mounted brake
lamp
16 Check brake lamps
17 Headlamp levelling malfunction
18 Left low beam failure
20 Right low beam failure
9. Once recalibration is complete
the Compass Settings screen will
be displayed.
To Next Page
Loading...
