166 Vehicle care
Bulb replacement
Contact a Holden dealer if unsure
about the bulb replacement process.
When replacing bulbs:
• Turn the ignition off and remove
the key.
• Turn off related switches.
• Fit bulbs of the specied
wattage only.
• Do not touch bulbs or reectors
with bare hands.
• Clean stained bulbs with
methylated spirits.
Bulbs to be changed by
a Holden Dealer
• Side turn signal lamps
• Daytime running lamps
• Front fog lamps
• Centre High Mounted Stop lamp
(CHMSL)
• Courtesy lamps
Caution
Condensation may temporarily
appear on the inside of exterior
lamp lenses after rain or washing
the vehicle. Condensation occurs
when there is a temperature
difference between the inside and
outside of the lamp allowing a
ne mist on the inside surface of
the lamp lens. This condensation
will disappear when the vehicle is
in a dry environment or the lamp
is on. If water does collect in the
lamp contact a Holden Dealer.
Headlamp and front turn
signal lamps
1. Front Turn Signal Lamp
2. Low-Beam Headlamp
3. High-Beam Headlamp
To Next Page
Loading...
