Vehicle care 167
Low and high beam
1. Open the bonnet. Bonnet 0 156
2. For the passenger side bulb
replacement, remove the
windshield washer bottle ller
neck by turning it anti-clockwise
one-quarter turn and pulling it
straight up and out of the bottle.
3. Remove the desired headlamp
bulb access cover.
4. Turn the bulb counterclockwise
and pull straight back.
5. Disconnect the wiring harness
connector from the bulb
6. Install the new bulb in the
headlamp assembly by turning
clockwise.
7. Reconnect the wiring harness
connector.
8. Install the headlamp bulb access
cover.
9. For the passenger side bulb,
replace the windshield washer
bottle ller neck by turning it one-
quarter turn clockwise into the
bottle.
10. Check lamp operation.
Front turn signal lamp
1. Open the bonnet. Bonnet 0 156
2. Remove the turn signal
lamp bulb socket from the
headlamp assembly by turning
counterclockwise.
3. Remove the bulb from the bulb
socket by pulling it straight out.
4. Install the new bulb in the bulb
socket.
5. Install the bulb socket into the
headlamp assembly by turning
clockwise.
6. Check lamp operation.
To Next Page
Loading...
