Driving and operating 163
Warning
Never rely solely on the rear
vision camera when reversing
the vehicle. There are blind spots
that cannot be sensed by the
camera.
The rear vision camera is not
intended to replace the driver’s
judgment or attention toward
the rear of the vehicle when
reversing.
Before entering the vehicle,
always check the area around
the vehicle is clear of obstacles
and people.
Always perform head checks and
use the vehicle’s mirrors when
reversing.
If the vehicle sustains any
damage in the area of the rear
vision camera, the camera may
become misaligned. Contact a
Holden Dealer.
Activation
When the ignition key is in the ON
position and the vehicle is shifted
into R (Reverse), the rear vision
camera image is displayed on the
infotainment display.
Once the vehicle is shifted out of
R, the infotainment system display
returns to the previous screen.
Guidelines
When the camera image is displayed,
dynamic guidelines are also displayed
to assist with reversing the vehicle.
The trajectory lane of the vehicle
is shown in accordance with the
steering angle.
• Touch to hide the guidelines.
• Touch to show the guidelines.
Warning
The driver is always responsible
for taking care and attention
while manoeuvring the vehicle.
The camera display and
guidelines are only an aid and
are neither intended to, nor able
to take over any responsibility.
Guidelines and PA symbols can also
be turned on or off; Settings 0 132
Rear Cross Trafc Alert (RCTA)
On vehicles with RCTA, a triangle
with an arrow may display on the
screen to warn of trafc coming from
either direction.
RCTA detects objects approaching
from up to 20 metres from the left or
right side, behind the vehicle.