Vehicle care 179
Closing
Warning
To avoid injury and/or damage
to the vehicle, check each time,
before the bonnet is closed, the
contact area is unobstructed.
1. Place the support rod into the
holder.
2. Lower the bonnet and allow it to
drop into the catch.
3. Check the bonnet is engaged.
Warning
If while driving you notice the
bonnet has not been properly
closed, pull the vehicle over to
the side of the road at the earliest
possible moment and close the
bonnet correctly.
Note
Do not pull down on the bonnet when
the bonnet is supported by the rod.
To Next Page
Loading...
