EasyManua.ls Logo

HOLDEN MY18 TJ Trax - Brake;clutch fluid

HOLDEN MY18 TJ Trax
242 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
186 Vehicle care
Brake/clutch uid
Warning
Brake uid is poisonous and
corrosive and will damage the
paint nish of the vehicle if spilt.
Caution
Avoid contact with eyes and
skin. Wash any affected area
immediately.
Checking uid level
The level should be between the
MIN and MAX area.
If the uid level is correct, do not
remove the reservoir cap, as brake
uid exposed to the atmosphere will
quickly absorb moisture.
Adding brake uid
Recommended uids, lubricants and
parts 0 221
1. Turn the ignition off.
2. Wipe the sides of the cap clean.
3. Rotate the brake/clutch uid
reservoir cap anticlockwise and
remove.
4. Top up with the recommended
brake uid.
Warning
Using brake uid other than GM
recommended brake uid may
cause corrosion to components
of the braking system and
reduced braking performance.
Use only new brake uid. Use of
old, used or inferior brake uid
may endanger the functioning of
the brake system.
5. Secure the cap and clean up any
spilt uid.
If the brake/clutch uid requires
regular topping up, contact a Holden
Dealer immediately.
Caution
Do not dispose of used brake
uid with household waste.
Use the local, authorised waste
management facility.

Table of Contents

Related product manuals