190 Vehicle care
Front turn signal lamps
1. Open the bonnet. Bonnet 0 178
2. Remove the turn signal lamp
bulb by rotating anticlockwise.
3. Remove the bulb from the bulb
holder by pulling straight out.
4. Install a new bulb into the bulb
holder.
5. Reinstall the bulb holder into the
headlamp assembly by rotating
clockwise.
6. Check lamp operation.
Tail lamps, turn signals,
stop lamps and reverse
lamps
Type 1
1. Tail / stop lamp
2. Tail lamp
3. Rear turn signal lamp
4. Reverse lamp
To Next Page
Loading...
