EasyManua.ls Logo

HOLDEN MY18 TJ Trax - Operate Pedal Light; Park Assist Warning Light; Electronic Stability Control (ESC) Light; Electronic Stability Control (ESC) off Light

HOLDEN MY18 TJ Trax
242 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
70 Instruments and controls
Electronic Stability
Control (ESC) light
The indicator light illuminates for a
short time when the ignition is turned
on to show the light is working.
If the light ashes while driving, the
ESC is actively helping the vehicle
with road grip and stability.
If the light illuminates or does not
extinguish while driving, contact a
Holden Dealer immediately.
Electronic Stability
Control (ESC) off light
The indicator light illuminates for a
short time when the ignition is turned
on to show the light is working.
illuminates when the ESC is
deactivated.
Electronic Stability Control (ESC)
0
157
Traction Control System
(TCS) off light
The
=
indicator light illuminates for a
short time when the ignition is turned
on to show the light is working.
=
illuminates when the TC is
deactivated.
Bonnet ajar light
The i indicator light illuminates
for a short time when the ignition
is turned on to show the light is
working.
i illuminates when the bonnet is
not completely closed.
Operate pedal light
# illuminates yellow.
Operate the clutch pedal (manual)
or brake pedal (auto) to start the
engine.
Park assist warning light
r illuminates for a short time when
the ignition is turned on to show the
light is working.
If the light does not extinguish or if
r illuminates when reverse gear is
selected:
The sensors may be dirty.
The sensors may be covered by
ice or snow.
There may be ultrasonic wave
interference.
If the light does not extinguish,
contact a Holden Dealer.
Park Assist (PA) 0
160

Table of Contents

Related product manuals