74 Instruments and controls
Displays an estimate of the oil’s
remaining useful life. This may only
be displayed while the vehicle is
stationary.
If, for example, : 98% is displayed,
it means 98% of the current oil life
remains.
When the remaining oil life is
low, the vehicle message : %
CHANGE will be displayed.
The engine oil should be changed as
soon as possible.
After an engine oil change, the
engine oil life system will be reset by
a Holden Dealer.
How to reset the engine oil life
system
Reset the system whenever the
engine oil is changed so the system
can calculate the next engine oil
change.
1. Turn the ignition On with the
engine not running.
2. Press the MENU button on the
turn signal lever, to select the
Remaining oil life display in the
Driver Information Centre (DIC).
3. Press the SET/CLR button to
reset the oil life to 100%.
4. Turn the ignition Off.
Take care not to reset the display
accidentally at any time other than
after the oil is changed.
If the vehicle message comes back
on when the vehicle is started, the
engine oil life system has not reset.
Repeat the procedure.
Remaining oil life
Type 1
Type 2
To Next Page
Loading...
