EasyManua.ls Logo

HOLDEN MY18 TJ Trax - Page 83

HOLDEN MY18 TJ Trax
242 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instruments and controls 81
You can continue to drive the vehicle.
If this message continues to appear,
have the system repaired by a
Holden Dealer as soon as possible
to avoid damage to the engine.
Engine Overheated – Idle Engine
Displays when the engine coolant
temperature is too hot. Stop and
allow the vehicle to idle until it cools
down.
Engine Overheated – Stop
Engine
Displays and a continuous chime
sounds if the engine cooling system
reaches unsafe temperatures for
operation.
Stop and turn off the vehicle as soon
as it is safe to do so to avoid severe
damage.
This message clears when the
engine has cooled to a safe
operating temperature.
Engine oil messages
Change Engine Oil Soon
Displays when the engine oil needs
to be changed.
Remaining oil life 0
74
Engine Oil Hot, Idle Engine
Displays when the engine oil
temperature is too hot. Stop and
allow the vehicle to idle until it cools
down.
Oil Pressure Low – Stop Engine
Displays if low oil pressure levels
occur.
Stop the vehicle as soon as safely
possible and do not operate it until
the cause of the low oil pressure
has been corrected. Check the oil
as soon as possible and have the
vehicle serviced by a Holden Dealer.
Engine power messages
Engine Power is Reduced
Displays when the vehicle’s engine
power is reduced.
Reduced engine power can affect
the vehicle’s ability to accelerate.
If this message is on, but there is no
reduction in performance, proceed
to your destination. The performance
may be reduced the next time the
vehicle is driven.
The vehicle may be driven at a
reduced speed while this message
is on, but maximum acceleration and
speed may be reduced.
Anytime this message stays on,
or displays repeatedly, the vehicle
should be taken to a Holden Dealer
for service as soon as possible.

Table of Contents

Related product manuals