Holden Colorado Owner Manual (Australia-Localizing-Australia-12333014) -
2019 - crc draft - 3/1/18
129
the name must be precisely spoken.
Nicknames or short names for the
businesses will not likely be found.
Lesser known businesses might
have to be located by category,
such as fast food, hotels, or banks.
“Destination Contact” : Begin a
dialogue to enter a specific
destination contact name.
“Cancel Route” : End route
guidance.
Voice Recognition for the
Phone
“Call <contact name>” : Initiate a
call to an entered contact. The
command may include location if
the contact has location numbers
stored.
“Call <contact name> At Home,”
“At Work,” “On Mobile,” or “On
Other” : Initiate a call to an entered
contact and location at home, at
work, on mobile device, or on
another phone.
“Call <phone number>” : Initiate a
call to a standard phone number
seven or 10 digits in length.
“Pair Phone” : Begin the Bluetooth
pairing process. Follow instructions
on the radio display.
“Switch Phone” : Select a different
phone for outgoing calls.
“Voice Keypad” : Begins a
dialogue to enter special numbers
like international numbers. The
numbers can be entered in groups
of digits with each group of digits
being repeated back by the system.
If the group of digits is not correct,
the command “Delete” will remove
the last group of digits and allow
them to be re-entered. Once the
entire number has been entered, the
command “Call” will start dialling the
number.
“Voice Mail” : Initiate a call to voice
mail numbers.
Voice Pass-Thru
Voice pass-thru allows access to the
voice recognition commands on the
mobile phone, for example, Siri or
Voice Command. See the mobile
phone manufacturer's user guide to
see if the mobile phone supports
this feature. To activate the phone
voice recognition system, press and
hold
g on the steering wheel for a
few seconds.
Infotainment System - MyLink with Built-in Navigation
To Next Page
Loading...
