Holden Colorado Owner Manual (Australia-Localizing-Australia-12333014) -
2019 - crc draft - 3/1/18
131
Infotainment System Controls
For information about how to
navigate the menu system using the
infotainment controls, see Using the
System 0 100.
Phone : Touch this screen button
on the Home Page to enter the
phone main menu.
Audio System
When using the Bluetooth system,
sound comes through the vehicle's
front audio system speakers and
overrides the audio system. Turn
the volume knob during a call to
change the volume level. The
adjusted volume level remains in
memory for later calls. The system
maintains a minimum volume level.
Pairing
A Bluetooth-enabled mobile phone
must be paired to the Bluetooth
system and then connected to the
vehicle before it can be used. See
the mobile phone manufacturer's
user guide for Bluetooth functions
before pairing the mobile phone.
Pairing Information
.
A Bluetooth phone with music
capability can be paired to the
vehicle as a phone and a music
player at the same time.
.
Up to 10 devices can be paired
to the Bluetooth system.
.
Pairing only needs to be
completed once, unless the
pairing information on the mobile
phone changes or the mobile
phone is deleted from the
system.
.
One Bluetooth device can be
connected to the Bluetooth
system at a time.
.
If multiple paired mobile phones
are within range of the system,
the system connects to the
paired mobile phone in the order
that they were last used in the
system. To link to a different
paired phone, see “Linking to a
Different Phone” later in this
section.
Pairing a Phone
1. Touch the Phone screen
button.
2. Select Phone and select Pair
Device.
3. A four-digit Personal
Identification Number (PIN)
appears on the display. The
PIN, if required, may be used
in Step 5.
4. Start the pairing process on the
mobile phone to be paired to
the vehicle. See the mobile
phone manufacturer's user
guide for information on this
process.
5. Locate “MyLink” on the phone's
display. Follow the instructions
on the mobile phone to enter
the PIN provided in Step 3 or
confirm the six-digit code
shown on the display. After the
PIN is successfully entered or
the code is confirmed, the
system responds with “<Device
name> has been successfully
paired” when the pairing
process is complete.
Infotainment System - MyLink with Built-in Navigation
To Next Page
Loading...
