Holden Colorado Owner Manual (Australia-Localizing-Australia-12333014) -
2019 - crc draft - 3/1/18
163
Changing to Next/Previous Movie
.
Touch
u to change to the
next file.
.
Touch
t within five seconds of
the playback time to play the
previous file.
Returning to the Beginning of the
Current Movie
Touch
t after five seconds of the
playback time.
Scanning Forwards or Backwards
Touch and hold
t or u during
playback to rewind or fast forward.
Release the button to resume
playback at normal speed.
Viewing Full Screen
Touch
t from the movie screen.
Touch
t again to return to the
previous screen.
Using the USB Movie Menu
1. Touch MENU from the movie
screen.
2. Touch the appropriate menu:
.
Tone Settings: shows the
sound setup. See “Tone
Settings” in Operation
0 153.
.
Auto Volume: Automatically
adjusts the volume
according to the speed of
the vehicle. See “Auto
Volume” in Operation
0 153.
.
Clock Temp. Display:
Allows selection of On or
Off to show the clock and
temperature on the full
screen.
.
Display Settings: Adjusts
for brightness and contrast.
3. Touch
0 to exit.
Auxiliary Devices
Using the Auxiliary Input Jack
(if equipped)
Settings menus and functions may
vary depending on vehicle options.
If equipped, the auxiliary input jack
can be used to connect external
audio devices such as an iPod
®
,
iPhone
®
, MP3 player, CD player or
other supported device for use as
another source for audio listening.
This input jack is not an audio
output; do not plug headphones into
the front auxiliary input jack.
If equipped with auxiliary input jack
the infotainment system can play
music connected by the auxiliary
device.
Playing Music
To play music from the device, if the
device is already connected:
1. Press
{.
2. Touch AUDIO.
3. Touch Source.
4. Touch AUX.
5. Touch
0.
To adjust the tone settings, see
"Preset Tone Settings" and "Custom
Tone Settings" under "System
Settings" in Operation 0 153.
Infotainment System - MyLink
To Next Page
Loading...
