HOLDEN MY19 RG Colorado - Page 169

Holden Colorado Owner Manual (Australia-Localizing-Australia-12333014) -
2019 - crc draft - 3/1/18
167
.
Z indicates only Bluetooth
music is enabled.
Connecting a Paired Bluetooth
Device
1. Press
{.
2. Touch Settings.
3. Touch Bluetooth, then Device
Management.
4. Touch the device to be
connected.
Checking the Bluetooth
Connection
1. Press
{.
2. Touch Settings.
3. Touch Bluetooth, then Device
Management.
4. The paired device will show
highlighted.
Disconnecting a Bluetooth Device
1. Press
{.
2. Touch Settings.
3. Touch Bluetooth, then Device
Management.
4. Touch the name of the device
to be disconnected.
5. Touch Disconnect.
Deleting a Bluetooth Device
1. Press
{.
2. Touch Settings.
3. Touch Bluetooth, then Device
Management.
4. Touch the device to delete.
5. Touch
Y.
6. Touch Delete.
Note
If the device to be deleted is
connected, the disconnecting
procedure needs to be performed
previously to the deleting procedure.
Bluetooth Music
Before playing Bluetooth music,
read the following information:
.
A mobile phone or Bluetooth
device that supports Advanced
Audio Distribution Profile (A2DP)
versions over 1.2 must be
registered and connected to the
vehicle.
.
From the mobile phone or
Bluetooth device, find the
Bluetooth device type to set/
connect the item as a stereo
headset.
.
e will appear on the screen if
the stereo headset is
successfully connected.
.
The sound played by the
Bluetooth device is delivered
through the infotainment system.
.
Bluetooth music can be played
only when a Bluetooth device
has been connected. To play
Bluetooth music, connect the
Bluetooth phone to the
infotainment system.
.
If the Bluetooth device is
disconnected while playing
phone music, the music is
discontinued. The audio
streaming function may not be
Infotainment System - MyLink