Holden Colorado Owner Manual (Australia-Localizing-Australia-12333014) -
2019 - crc draft - 3/1/18
180 Climate Controls
Temperature
Set temperature to the desired value
by turning the knob (E).
Blue : Cold.
Red : Warm.
If the minimum temperature is set,
the climate control system runs at
maximum cooling.
Heating
.
Turn the temperature control
knob (E) to the red area for
heating.
.
Select the air distribution (C) to
the desired position.
.
Turn the fan control knob (A) to
the desired speed.
Maximum Heating
Use the maximum heating mode for
quick heating.
.
Turn the temperature control
knob (E) all the way to the red
area for heating.
.
Turn the fan control knob (A) to
maximum speed.
Air Distribution
Press the respective button for
desired adjustment, the setting of air
distribution is indicated on the
Info-Display.
- : To windscreen and foot well.
6 : To foot well.
E : To head area via adjustable air
vents.
) : To head area via adjustable air
vents and foot well.
Fan Speed
Adjust the air flow by turning the fan
knob (A) to the desired speed.
Demisting and Defrosting the
Windows
.
Press button
0 (D).
.
Recirculation will switch to
fresh air.
.
Air distribution and fresh air are
set automatically.
The air conditioning will be
automatically switched on.
Switch on heated rear window
1
(G).
See Heated Rear Window 0 31.
Air Recirculation System
The air recirculation mode is
operated with the
/ (H) button.
When activated, external air inlet is
closed and internal air is
recirculated within the cabin.
To speed up the cool down and
reach the desired temperature
faster, if not in the AUTO mode, the
air recirculation function is
recommended.
{
Warning
The exchange of fresh air is
reduced in air recirculation mode.
In operation without cooling, the
air humidity increases, so the
windows may mist up. The quality
of the passenger compartment air
deteriorates, which may cause
the vehicle occupants to feel
drowsy.
To Next Page
Loading...
