Holden Colorado Owner Manual (Australia-Localizing-Australia-12333014) -
2019 - crc draft - 3/1/18
196 Driving and Operating
Manual Transmission
.
To engage reverse gear, press
the shift lever and move towards
the right side and rearwards.
.
Do not engage reverse gear
while the vehicle is moving.
.
If the gear does not engage,
move the shift lever to neutral,
release the clutch pedal, press
the clutch pedal again then
repeat gear selection.
.
Ensure the clutch pedal is
pushed all the way to the floor.
.
Do not use the pedal as a
foot rest.
Caution
Do not drive with your hand
resting on the shift lever.
Drive Systems
Four-Wheel Drive
If the vehicle has a four-wheel drive
system, engine driving power can
be sent to all four wheels for
additional traction.
To get the best performance out of
four-wheel drive, you must be
familiar with its operation. Use
two-wheel drive high for most
normal driving conditions.
Note
.
Driving on clean, dry pavement
in four-wheel drive for an
extended period of time can
cause premature wear on the
vehicle drivetrain.
.
Do not engage four-wheel drive
if wheels of different sizes are
fitted, as damage to the vehicle
can result. The repair would not
be covered by warranty.
.
Incorrect usage of the four-wheel
drive may damage the system.
Use four-wheel drive only on
tracks with low adherence, dirt
To Next Page
Loading...
