Holden Colorado Owner Manual (Australia-Localizing-Australia-12333014) -
2019 - crc draft - 3/1/18
Vehicle Care 267
Film Restoration
The following restoration
recommendations will help keep
your vehicle wraps looking
their best:
.
Do not use any abrasive
polishes or cutting compounds.
.
Do not use any polishing or wax
products on matte or textured
films.
.
Use if there is wax or any wax
residue on the surface, remove
with an all-purpose cleaner.
The following table shows some
available products to help restore
your vehicle wrap.
Note
Before using, always test and
approve in an inconspicuous area.
Film or Finish Type Product or Solution
Smooth Gloss Texture
3M™ Perfect-It™ Show Car Paste
Wax 39526
Matte or Satin Texture
Isopropyl alcohol and water (2:1
ratio)
Matte White (1080-M10)
Carbon Fibre White (1080-CF10)
Based on the type/degree of
contamination, use one of more of
these solutions, in the order shown,
to remove any build-up:
1. Hot, soapy water solution
2. Isopropyl alcohol (IPA) and water
(ratio 2:1)
3. Simple Green
®
All-Purpose
Cleaner
4. Household chlorine bleach;
followed by IPA/water.
5. Mineral spirits; followed by IPA/
water
Carbon Fibre or Brushed Metal
Texture
3M™ Tyre Restorer or Meguiar's
Natural Shine Protectant
Carbon Fibre Black (1080-CF12)
Meguiar's Ultimate Black Plastic
Restorer
To Next Page
Loading...
