Holden Colorado Owner Manual (Australia-Localizing-Australia-12333014) -
2019 - crc draft - 3/1/18
26 Keys, Doors, and Windows
Vehicle Security
Anti-theft Alarm System
The system monitors the doors,
ignition and the bonnet.
The system is activated:
.
Thirty seconds after locking the
vehicle.
.
Alternatively, by pressing
Q on
the key a second time.
The system is deactivated by:
.
Pressing
" on the key.
Note
.
If the driver's door is opened
manually, while the alarm is
activated, the key needs to be
inserted into the ignition within
10 seconds to avoid triggering
the alarm. During the
10 seconds, the horn chirps and
the hazard warning flashers
activate to provide a warning.
.
When the alarm is triggered, the
horn sounds and the hazard
warning flashers activate for
30 seconds.
.
If the alarm was triggered during
alarm activation, the horn will
sound three times and the
hazard warning flashers will
activate three times, while
unlocking the vehicle.
Status LED
The status LED is located on top of
the instrument panel.
During the first 30 seconds of
system activation:
.
LED illuminates (test, arming
delay).
.
LED flashes quickly (doors or
bonnet are not completely
closed, or there is a system
fault).
When the system is armed:
.
LED flashes slowly.
If a fault occurs, contact a Holden
Dealer.
Immobiliser
The immobiliser prevents
unauthorised engine starting.
.
If an invalid key is inserted into
the ignition switch, an indicator
on the instrument panel will
flash.
The vehicle will not start.
.
The engine is automatically
immobilised after the key is
turned to Lock and has been
removed from the ignition switch.
.
Only valid ignition keys can be
used to start the engine.
To Next Page
Loading...
