HOLDEN MY19 RG Colorado - Page 81

Holden Colorado Owner Manual (Australia-Localizing-Australia-12333014) -
2019 - crc draft - 3/1/18
Instruments and Controls 79
Press MENU to switch between the
menus.
The following menus can be
selected:
.
Vehicle Pages (Vehicle
Information Menu)
.
Trip Computer (Trip/Fuel
Information Menu)
.
ECO Menu
Turn the adjusting knob to scroll
through the items in each menu or
to set a numeric value.
Press the SET/CLR button to select
a function or to confirm a message.
Note
The following describes possible
options. Some may not be available
in your vehicle.
Vehicle Pages
.
Battery Voltage.
.
Coolant Temperature.
.
Engine and Idle Hours.
.
Tyre Load (if available).
.
Transmission Fluid Temperature.
.
Speed Warning.
.
Remaining Oil Life (if available).
.
Tyre Pressure (if available).
Battery Voltage
This displays the current battery
voltage.
Coolant Temperature
Displays the current coolant
temperature.
Engine and Idle Hours
The hour meter is used to display
the number of hours the engine has
been running.
Tyre Load
This display shows the current tyre
load. The tyre loads that can be
selected are:
Light : Light loaded vehicle.
ECO : Best Economy.
Max : Heavy loaded vehicle.
Transmission Fluid Temperature
Displays the current transmission
fluid temperature.
Speed Warning
This mode allows you to set a
warning signal for when a desired
speed is exceeded.
To set the speed warning, press the
SET/CLR button and use the thumb
wheel to select the desired speed.
Press SET/CLR to confirm.
Remaining Oil Life
Displays the current percentage of
remaining oil life.
To reset the engine oil life system
see Engine Oil Life System 0 231.