Driving and operating 141
0. LOCK: The key can only be
inserted and removed from this
position.
1. Ignition Accessory: When the
key is in this position, the audio
system operates.
2. Ignition On: When the key is in
this position, the engine is ready to
start and all electrical systems are
active.
3. Engine Start: Turn the key to
this position and release when the
engine is running.
Caution
Do not leave the key in positions
1 or 2 for a long time, unless the
engine is running, otherwise the
vehicle’s battery will discharge.
Turning the ignition off
To turn the ignition off:
1. Stop the vehicle and shift the
automatic transmision to P
(Park).
2. Push the key toward the steering
column and turn the key to
LOCK. Remove the key
3. Apply the parking brake rmly.
Vehicles with electronic key
The electronic key must be inside
the vehicle.
Accessory power mode: press
the Engine Start/Stop button once
without operating the brake pedal.
The yellow LED in the button
illuminates. The steering wheel lock
is released and some electrical
functions are operable; the ignition
is off.
Ignition on power mode: press and
hold the Engine Start/Stop button for
6 seconds without operating brake
pedal.
To Next Page
Loading...
