Driving and operating 151
Brakes
The brake system comprises two
independent brake circuits.
If one brake circuit fails, the vehicle
can still be braked using the other
brake circuit. However, braking effect
is achieved only when the brake
pedal is pressed rmly. Considerably
more force is needed for this.
The braking distance is extended.
Contact a Holden Dealer.
Caution
Do not drive with your foot resting
on the brake pedal. This will
accelerate wear of the brake
components and cause the
brakes to become overheated.
• Do not engage reverse gear
while the vehicle is moving.
• Ensure the clutch pedal is
completely pushed to the oor.
• Do not use the pedal as a foot
rest.
Caution
Do not drive with your hand
resting on the shift lever.
Manual transmission
Select reverse gear while the vehicle
is stationary:
1. Press the clutch pedal to the oor.
2. Wait 3 seconds.
3. Pull the button of the front of the
shift lever up.
4. Move the shift lever to position R.
If the gear does not engage:
1. Return the shift lever to neutral.
2. Release the clutch pedal.
3. Push the clutch pedal again and
repeat gear selection.
To Next Page
Loading...
