HOLDEN MY19 TJ Trax - Antilock Brake System (ABS)

152 Driving and operating
Operation
ABS operation is noticeable by
pulsing of the brake pedal and the
noise of the regulation process.
The initial self-check may also be
audible.
Keep the brake pedal fully pressed
throughout the braking process,
without pumping it.
Caution
If there is a malfunction with the
ABS, the vehicle’s brake system
remains operational, but without
ABS assistance. Have a Holden
Dealer check the system as soon
as possible.
Antilock Brake System (ABS)
warning light 0 70
Antilock Brake System
(ABS)
The ABS:
• Continuously monitors the
vehicle’s braking system
preventing the wheels from
locking up.
• Allows maximum braking effort
while full steering control is
retained, even in the event of
panic braking.
Warning
Do not let this special safety
feature tempt you into taking
risks when driving. Trafc
safety can only be achieved by
adopting a responsible driving
style. You should always adjust
the vehicle’s speed to suit road
and trafc conditions. Always
maintain an adequate distance to
the vehicle in front of you.
Warning
After driving through deep water,
washing the vehicle or using
the brakes excessively such as
when descending a steep hill, the
brakes can temporarily lose their
stopping power. This may be
due to wet brake components or
overheating.
Shift to a lower gear when going
down hills. Do not continuously
apply the brakes.
To dry out the brakes:
• Ensure there is a clear area
ahead.
• Lightly apply the brakes.
• Maintain a slow forward speed
until performance returns to
normal.